 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Zanussi Nexus FL884 - Cold feed gone ?
Can anyone please help..
Our machine will only work on the Boil wash and 60 degree wash. It will still drain and spin but will not start on any other program. I've taken cold hose off and checked water flow / blockage etc but it's still no go... Any ideas ? Thanks in advance for time and patience. Kert |
|
#2
|
|||
|
|||
Quote:
Ok, the latest is that we filled the powder draw to the top with Soda Crystals and put the empty machine on a full 'Boil Wash' cycle. This seems to have done the trick - all other cycles now ok, but we don't know how ! If it goes wrong again I'll post on this forum.. Kert |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Adding shower pump without a separate cold feed | UK diy | |||
| Pipe run between Cold water tank and hot water cylinder. | UK diy | |||
| Basics on Depth of Cuts | Metalworking | |||
| electric shower cold water feed | UK diy | |||
| how do I ensure there is a cold water path to the boilers return | UK diy | |||
Linear Mode
