Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,632
Default Interesting pig roaster

Ignoramus28671 fired this volley in
:

http://igor.chudov.com/tmp/Pig-Roaster.jpg


Ig, other than wasting a tremendous amount of heat and potential flavor-
enriching fat-smoke, what's so great about that?

It's just a brazier with a rotisserie, and a wasteful "non-barbequer's
intuition" way to roast a shoat.

Close it in, and you build half the fire, capture all of the smoke, and
produce a superior end product.

LLoyd
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 40
Default Interesting pig roaster

On 2010-07-31, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
Ignoramus28671 fired this volley in
:

http://igor.chudov.com/tmp/Pig-Roaster.jpg


Ig, other than wasting a tremendous amount of heat and potential flavor-
enriching fat-smoke, what's so great about that?

It's just a brazier with a rotisserie, and a wasteful "non-barbequer's
intuition" way to roast a shoat.

Close it in, and you build half the fire, capture all of the smoke, and
produce a superior end product.


I actually agree with you. But the result is awesome. We are just
about to start eating this pig right now.

i
  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,632
Default Interesting pig roaster

Ignoramus28671 fired this volley in
:

I actually agree with you. But the result is awesome. We are just
about to start eating this pig right now.


The "result" can be had in any open brazier, or even in a large enough
oven.

"REAL" barbeque requires 1)low, long heat, 2)capturing of the wood smoke
and fat smoke, to allow it to re-condense on the meat.

A shoat that small is delightful no matter how you cook it (short of
boiling), but can be so _extremely_ enhanced by proper cooking to make
eating it almost an orgasmic experience.

IF I were to make an open brazier/rotisserie for a large cut like that,
I'd make it like the American Colonial braziers that had clockwork
rotisseries (of course, mine would be electrical) and held the meat close
in front of a vertical fire box. Such an arrangement prevents fat flare-
ups that do not enhance the flavor, but only add a burnt flavor. A
decided advantage to the vertical fire boxes (with charcoal) is that one
can add fresh fuel without smoking the meat with the residues of
incompletely-lit coals, which are harsh and resinous in flavor.

Fat smoke improves flavor. Burnt fat residue on the cut of meat does
not. "Browned" fat, on the other hand, is a delicacy.

If you're not trying to capture the smoke, then prevent the fires from
reaching the meat, at all; cook only by radiant heat, not by fat fire
flare-ups.

You may have guessed, I'm a barbeque and grilling fanatic, and distinctly
HATE anyone calling a grill a "barbeque", which it ain't. T'ain't a
brazier, either, which is what you showed. Each has its merits, and its
limits.

LLoyd
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anolon 16-Inch Rectangular Roaster with Rack [email protected] Woodturning 0 May 22nd 09 01:28 PM
Interesting....veddy interesting....OT of course. Rex Metalworking 11 November 16th 07 06:31 PM
Interesting....veddy interesting....OT of course. Rex Metalworking 0 November 8th 07 10:11 PM
pig roaster plans needed bmwsid Metalworking 2 April 29th 05 12:48 PM
WTD plans for a PIG Roaster amc Metalworking 11 August 7th 03 11:15 AM


All times are GMT +1. The time now is 04:04 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"