Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
have an Insignia is-pd040922 7" portable dvd player with "no disk" problem
on all video dvd's. Have cleaned the lens, cleaned the sliding mechanism with no help. Tried with an Audio CD and this works fine, so probably lets out the above causes, as well as the spindle motor Searching on google finds hundreds of similar complaints about Insignia .. Does the CD use the same laser and lens as the dvd ? Would appreciate any other ideas to try before I give up on this machine |
#2
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]() "Ray"... Does the CD use the same laser and lens as the dvd ? ** CDs use an infra-red laser while DVDs use a visible red one. 758nm as compared to 657 nm. ..... Phil |
#3
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
Thanks Phil...
I guess these lasers must be integrated into the same lens, cause I cant see 2 different optical units.. Ray "Phil Allison" wrote in message ... "Ray"... Does the CD use the same laser and lens as the dvd ? ** CDs use an infra-red laser while DVDs use a visible red one. 758nm as compared to 657 nm. .... Phil |
#4
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
On Fri, 16 Dec 2011 19:45:43 -0800, "Ray"
put finger to keyboard and composed: I guess these lasers must be integrated into the same lens, cause I cant see 2 different optical units.. Here is a reference circuit for a Cheertek chipset: http://www.users.on.net/~fzabkar/DVD...65-AM5868S.pdf You can see the pinout of a Hitachi HOP-1200W optical pickup at the top of page 3. Notice that there are separate pins for the DVD and CD laser diodes (DVDLD and CDLD). - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
#5
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]() I guess these lasers must be integrated into the same lens, cause I cant see 2 different optical units.. Here is a reference circuit for a Cheertek chipset: http://www.users.on.net/~fzabkar/DVD...65-AM5868S.pdf You can see the pinout of a Hitachi HOP-1200W optical pickup at the top of page 3. Notice that there are separate pins for the DVD and CD laser diodes (DVDLD and CDLD). - Franc Zabkar Thanks Frances I found what looks to be the same assembly as mine on ebay http://www.ebay.ca/itm/170696204492?... 4.m1423.l2649 Do you think it would work without much adjusting ? Everything looks fixed except for 2 little round things on the side of the pickup that might be pots, except I dont see a screwdriver slot. Looking at your diagram I cant spot any adjustments for only about $10 it might be worth trying Ray |
#6
![]()
Posted to sci.electronics.repair
|
|||
|
|||
![]()
On Sun, 18 Dec 2011 18:04:19 -0800, "Ray"
put finger to keyboard and composed: I found what looks to be the same assembly as mine on ebay http://www.ebay.ca/itm/170696204492?... 4.m1423.l2649 Do you think it would work without much adjusting ? Everything looks fixed except for 2 little round things on the side of the pickup that might be pots, except I dont see a screwdriver slot. Looking at your diagram I cant spot any adjustments for only about $10 it might be worth trying Ray I used the Hitachi pickup as a general example that illustrates the point that there are two laser diodes in a DVD player. I have no idea what kind of pickup is actually used in your unit. BTW, it's "Franc", originally pronounced as in Franz, but pronounced as "Frank" when anglicised. And Frances is a female name -- Francis is male. :-) - Franc Zabkar -- Please remove one 'i' from my address when replying by email. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Try this fix for portable DVD player if "no disc" but spins error... | Electronics Repair | |||
"Initial" Track on CD Rom Disk (Physical Stop or "Seek") | Electronics Repair |