Madrone
 

I have available to me some madrone trees. Is there any value in making
boards? Is it good for firewood?

Tin Woodsmn

Madrone
 

TinWoodsmn wrote:
I have available to me some madrone trees. Is there any value in making
boards? Is it good for firewood?

Tin Woodsmn

The wood, especially any burls you might have could be very valuable to
woodturners. You might check with your local woodturning club, or post
something over at the woodturning NG.

Robert

Madrone
 

Madrone is very good firewood. It puts out more BTU than most any other
species of trees. Just make sure you split it before it dries or you won't
split it. It is very, very, very hard after drying.

Marv

"TinWoodsmn" wrote in message
. ..
I have available to me some madrone trees. Is there any value in making
boards? Is it good for firewood?

Tin Woodsmn

Madrone
 

TinWoodsmn wrote:
I have available to me some madrone trees. Is there any value in
making boards? Is it good for firewood?

Tin Woodsmn

Absolutely. I have made clocks and display cases from it. See following
link:
http://www.westernhardwood.com/madrone.shtml

--
Frank Howell


-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

Madrone
 

Frank Howell wrote:
TinWoodsmn wrote:
I have available to me some madrone trees. Is there any value in
making boards? Is it good for firewood?

Tin Woodsmn

Absolutely. I have made clocks and display cases from it. See following
link:
http://www.westernhardwood.com/madrone.shtml

Frank,

Your pictures on that page are pointing to your local hard disk, so they
do not show.

Harvey

Madrone
 

eclipsme wrote:
Frank Howell wrote:
TinWoodsmn wrote:
I have available to me some madrone trees. Is there any value in
making boards? Is it good for firewood?

Tin Woodsmn

Absolutely. I have made clocks and display cases from it. See
following link:
http://www.westernhardwood.com/madrone.shtml

Frank,

Your pictures on that page are pointing to your local hard disk, so
they do not show.

Harvey

I didn't see them either. It was the info on the wood that should answer you
questions, but if you want pics, see this:
http://www.hobbithouseinc.com/person...cs/madrone.htm

http://www.thejoinery.com/specialty_...romadrone.html

--
Frank Howell


-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

Madrone
 

TinWoodsmn wrote:
: I have available to me some madrone trees. Is there any value in making
: boards? Is it good for firewood?

: Tin Woodsmn



It's pretty and the burls are much liked by veneer makers and turners.
Madrone is legendary for its warping abilities, so if you slice it into boards
cut them overtihick and weigh them down while they dry.


-- Andy Barss