On Mon, 5 Sep 2011 15:49:02 -0400, "John Grossbohlin"
wrote:

The magnetic switch on my Jet 3 HP cabinet saw shuts off randomly while the
saw is in use. The inside of the switch is nearly spotless so it isn't a
dust built up problem...

I posted some photos in ABPW... In the photos it can be seen that there are
adjustment wheels in the switch. What do they do and how does one judge that
the adjustments are correct?

This problem first occurred back in June while I was building a patrol box
for my sons' Boy Scout Troop. I was away for a couple months this summer and
had forgotten about the problem until I used the saw today...

Thoughts?

Thanks,

John

P.S. You can see where I was at
http://www.crazyguyonabike.com/doc/RipVanWinkle


The best bet would be to contact Jet Tools:

North America Manufacturing Headquarters
427 New Sanford Rd
La Vergne, TN 37086-4184
Phone: 615-793-8900
Fax: 615-793-8905
Email:

or the US distributor for NHD Industrial, the maker of the overload
relay:

Distributor in USA
Kevin McSorley
Electrotech Sales Group LLC 151 Discovery Drive Unit 111 Colmar, PA
18915
P 215-997-8855; F 215-822-7632

www.esgllc-usa.com
--
Jack Novak
Buffalo, NY - USA