Attached two pictures show 17 maple drawer boxes I made for a contractor
friend. The material is about 9/16 thick strips of glued up sap wood. (No
dark heart wood) The removable bottoms are 1/4 plywood (actually
underlayment) bonded to laminate. These will go into a remodeled kitchen.
The cabinets will be unstained cherry and everything will get a sprayed
clear lacquer finish. Note the dovetail joints. These were cut using a
Porter Cable Omnijig. It takes a bit of trickery to get those stretched
pins at the top and bottom of all joints.
Earl Creel