You can find lots of info on the net about re-caning chairs.
A long time ago I had a project as a teen to recane a rocking
chair seat - took about a month of casual time, but well worth
learning.

Now Woodcraft (I suspect many others as well) sell pre-woven
cane, but it gets more tricky, I suppose, having to tie off each
individual hole - if using a long strip & actually doing the weaving,
you only need to tie off ends that remain, which are much fewer,
since you just loop from hole to hole on the "backside" of the
"loom"... But, of course, you spend orders of magnitude more
time doing the actual weaving. Look carefully at the piece you
have if it's not too late - check how the "backside" is finished.

Most important point - SOAK THE CANE WELL before trying
to use it. Otherwise it will break just where you don't want it to,
and the prewoven stuff is not inexpensive. Soaking will limber it
up to allow making the 90 degree bends you will need at each
hole.

HTH,
NGA


wrote in message
ups.com...
All,

I believe I have found what this is called -- woven cane. Thanks much
for any consideration you may have provided.

Mike