View Single Post
  #5   Report Post  
Posted to rec.woodworking
Peter Lynch Peter Lynch is offline
external usenet poster
 
Posts: 139
Default Wood Rat? What do you not like?

On Sat, 22 Jul 2006 05:59:56 -0400, Joe Bemier wrote:
On Sat, 22 Jul 2006 09:27:27 GMT, Peter Lynch
wrote:

On Fri, 21 Jul 2006 21:22:47 -0400, Joe Bleau wrote:
Thinking about getting one. Read everything on their website but we
all know they are not going to point out any negatives. Would like to
hear for users. Thanks.

Joe


Far too complicated. I bought mine about 4 years ago. I tried it a
little to start with, but haven't touched it for over 3 years.
Plus since operations take place underneath the router, you can't
see what's happening.


I was close to buying one a while back. I had the chance to use one to
try it out and the above -cannot see whats happening - is exactly why
I did not buy.

Pete



Oh yes, one more thing came to mind: you have to attach it to a wall.
This should be fairly substantial (not plasterboard/drywall). I found
that plugs were not sufficient - the unit pulled loose as it's quite
heavy when loaded with a BIG router. In the end I drilled right through
and used threaded rod, which was secured on the outside with nuts and
washers. Kinda makes it difficult to move around the shop.

Pete

--
.................................................. .........................
.. never trust a man who, when left alone ...... Pete Lynch .
.. in a room with a tea cosy ...... Marlow, England .
.. doesn't try it on (Billy Connolly) .....................................